Twitter is not working on Opera browser

Twitter is not working on Opera browser I have installed the opera browse in my computer. My computer is running the Windows XP into it. My problem is that I am not able to open the opera site from my computer. Whenever I try to do that, then in the place of opening the twitter page, it just shows me a blank page. I tried to do that many of the times and all the times it is showing me the same result. There is no problem with any of the other sites on this then why this is happening to Twitter lonely. If you have anything to share on this then please post it over here so that it will be helpful to me. Reply With Quote #2 Old 08-02-2011 Sean J's Avatar Sean J Sean J is offline Member Join Date: Feb 2008 Posts: 631 Re: Twitter is not working on Opera browser What is the version of the Opera that you are using? In my case I am using Opera 11 but it is not giving me any of similar problems with it. You have not talk regarding the edition of the Opera which you are having and therefore if you are having some version excluding the Opera 11 then I would like to advise you to change to the Opera 11. There are a lot of of my friends who are having the similar version and they all are take pleasure in browsing all the sites devoid of some problem. So I expect that this will accomplish the similar for you as well. Thank you. Reply With Quote #3 Old 08-02-2011 rashmi_ay rashmi_ay is offline Member Join Date: Nov 2009 Posts: 655 Re: Twitter is not working on Opera browser Ok, I would wish to inform you that the edition does not subject for the things like this. It ay be the problem by the improper installation of the opera in your system. So if you contain some problem with browsing any of the sites then there are odds that a number of of the installed files intended for the opera might be absent or tainted. The most excellent method to resolve the problem is to install the Opera once again in your computer. Previous to performing that, uninstall the presently installed browser as well as subsequent to that install it once again to your system. This time, you must look for it on google as well as download the fresh setup intended for this. You must download that as of the official opera site. This is the most excellent and the safest method to resolve the trouble for you. Reply With Quote #4 Old 08-02-2011 Rkhon's Avatar Rkhon Rkhon is offline Member Join Date: May 2008 Posts: 546 Re: Twitter is not working on Opera browser I am not certain regarding this but in my case when I was having the same trouble then the cause intended for that was the not working operating system. This is able to the difficulty in your case. So if you desire to verify that difficulty then the most excellent method for this is to perform the repair for your operating system. Take the bootable Windows CD and insert that to the optical drive of your computer. Boot from that CD and when it asks you that which kind of installation you want to perform then you will have to select repair and press enter. This will start repairing all the files for the operating system and will fix all the corrupted files. Don’t worry, it will not delete any of your personal data or not uninstall any of the software that you have installed in your computer. Reply With Quote #5 Old 09-02-2011 Grohu's Avatar Grohu Grohu is offline Member Join Date: May 2008 Posts: 671 Re: Twitter is not working on Opera browser OK, if you are not capable of solve the trouble then you can attempt one thing. Just remove the cache memory from your browser and along with this remove the entire the cookies that are saved inside your computer. This will take out the complete before stored password as of your computer enduringly and once the problem is resolved then you can once more keep the password and observe if that is equipped to consider that password. Good Luck!!! Reply With Quote #6 Unread 26-03-2012 kender42 kender42 is offline Member Join Date: Mar 2012 Posts: 1 Re: Twitter is not working on Opera browser I tried all that and I still get a blank page. I'm using Opera 11.61. This started happening to me on the last update. I have uninstalled and re-installed twice and I still get the same thing. This is what I get

How to give exception to pop-up blocker for selected sites in Internet Explorer 9?

How to give exception to pop-up blocker for selected sites in Internet Explorer 9? I have a domain group policy that specifies sites which gives exceptions to the Internet Explorer pop-up blocker which worked perfect with previous version. However, it didn’t seem to work fine with IE 9. The policy is User Configuration\Policies\Administrative Templates\Windows Components\Internet Explorer\Pop-up allow list. I am using wildcards: e.g. *.microsoft.com. Reply With Quote #2 Unread 26-03-2012 Kordell Kordell is offline Member Join Date: Jul 2010 Posts: 58 Re: How to give exception to pop-up blocker for selected sites in Internet Explorer 9? I never noticed this in my system. However, I guess you should create a new policy with the GMPC, it might require an ADM update. Verify both the original and new policies are being applied with gpresult /r and rsop.msc Reply With Quote #3 Unread 26-03-2012 Crista Crista is offline Member Join Date: Jul 2010 Posts: 52 Re: How to give exception to pop-up blocker for selected sites in Internet Explorer 9? Quote: Originally Posted by Kordell View Post I never noticed this in my system. However, I guess you should create a new policy with the GMPC, it might require an ADM update. Verify both the original and new policies are being applied with gpresult /r and rsop.msc If that dint worked, try the following solutions also. Try Clearing all user specified entries from the pop-up exception list and manually added one of the sites to the list as a limited user. Verify if the specified sites are present in HKCU\Software\Policies\Microsoft\Internet Explorer\New Windows\Allow Reply With Quote #4 Unread 26-03-2012 Maddy07 Maddy07 is offline Member Join Date: Jul 2010 Posts: 52 Re: How to give exception to pop-up blocker for selected sites in Internet Explorer 9? I think, I have a better solution. Try it out and let me know if this works. To get around this problem, install KB2530309, and then navigate to: User Config > Preferences > Control Panel Settings - Internet Settings Right click Internet Settings > New > Internet Explorer 8 (Note: With the KB2530309 fix, this applies to both IE8 and IE9). Select the Privacy tab > Settings. Enter your Pop-up exceptions here and apply changes. Now run gpupdate /force on your workstation or restart your workstation. Pop-up exceptions will now work correctly with IE9. Reply With Quote Reply

How to increase the number of recent sites in Dropdown list of Internet Explorer 9?

How to increase the number of recent sites in Dropdown list of Internet Explorer 9? I’ve been using IE8 since long and have recently switched to IE9. But ever since, I’ve been noticing an annoying characteristic about it. IE8 used to show about 10 previously visited sites in the dropdown, but contrary to this, IE9 shows only half of it, i.e. 9 of them. I frequently visit same sites so the drop down holds a lot of value for me. Any suggestion is wholeheartedly appreciated. Reply With Quote #2 Unread 26-03-2012 Don Of CS Don Of CS is offline Member Join Date: Apr 2010 Posts: 10 Re: How to increase the number of recent sites in Dropdown list of Internet Explorer 9? I understand your worry. But I don’t really think, you can increase the number of URLs that appear there. An alternate way to do this is to press “Ctrl +O” which opens the open dialog and efficiently showcases entire history. You can use the dropdown there and go to your preferred site. I don’t think, there’s another way out. Reply With Quote #3 Unread 26-03-2012 bARTLETT bARTLETT is offline Member Join Date: Aug 2010 Posts: 20 Re: How to increase the number of recent sites in Dropdown list of Internet Explorer 9? Quote: Originally Posted by Don Of CS View Post I understand your worry. But I don’t really think, you can increase the number of URLs that appear there. An alternate way to do this is to press “Ctrl +O” which opens the open dialog and efficiently showcases entire history. You can use the dropdown there and go to your preferred site. I don’t think, there’s another way out. The idea sounds cool. But trust me, I tried it and it’s nowhere near the convenience of that of using the old dropdown. You know what I mean right? I am sure, Microsoft must have thought of some alternative. ‘There has to be a way out’, in your words. But I don’t understand the reason behind reducing the number of number of URLs. Reply With Quote #4 Unread 26-03-2012 MegaTron MegaTron is offline Member Join Date: Apr 2010 Posts: 19 Re: How to increase the number of recent sites in Dropdown list of Internet Explorer 9? Your concern is totally justified. So is your faith in Microsoft. Yes! They do have an option wherein you can simply increase the number of previously visited sites. The reason for reducing them is to make the history result more precise. All you’ve got to do is to follow the following path Internet Options > Content (tab) > Autocomplete (settings button) > Un-check everything under the address bar. Reply With Quote Reply

How to disable Quicktime plugin for IE 10

How to disable Quicktime plugin for IE 10 There’s an unaddressed issue that I’ve been facing lately. My Quicktime plug-in hijacks file associations and plays content within the browser. I tried disabling the plug-in but as expected it didn’t work. When I try to open a media file on a website upon disabling the plug-in, the browser displays a red X and the media will not play. Even with my Windows file associations configured to open with another media player, the Quicktime plug-in still takes precedence. Reply With Quote #2 Unread 26-03-2012 Psykiller Psykiller is offline Member Join Date: Apr 2010 Posts: 101 Re: How to disable Quicktime plugin for IE 10 Ok! Let me tell you this issue is not unaddressed anymore. I’m assuming that yours is 64 bits Windows. All you need to do is: Close your IE. Backup and then delete the below given registry entry. Quote: reg export "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{4063BE15-3B08-470D-A0D5-B37161CFFD69}" D:\qt_plug-in\qt1.reg reg delete "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{4063BE15-3B08-470D-A0D5-B37161CFFD69}" /f If that doesn't get it, try these as well. Just delete and test one at a time. reg export "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{CB927D12-4FF7-4A9E-A169-56E4B8A75598}" D:\qt_plug-in\qt2.reg reg delete "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{CB927D12-4FF7-4A9E-A169-56E4B8A75598}" /f reg export "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{02BF25D5-8C17-4B23-BC80-D3488ABDDC6B}" D:\qt_plug-in\qt3.reg reg delete "HKLM\SOFTWARE\Classes\Wow6432Node\CLSID\{02BF25D5-8C17-4B23-BC80-D3488ABDDC6B}" /f reg export "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\3F9E7EA97A1AEE54490637032025DEF9" d:\qt_plug-in\qt4.reg reg delete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\3F9E7EA97A1AEE54490637032025DEF9" /f Start up IE again and test. Reply With Quote #3 Unread 26-03-2012 Nicholaash Nicholaash is offline Member Join Date: Aug 2010 Posts: 19 Re: How to disable Quicktime plugin for IE 10 Your assumption was not really correct. I am using 32 bits Windows. Will the same command work? Or is it something else? Waiting for a confirmation. Reply With Quote #4 Unread 26-03-2012 Psykiller Psykiller is offline Member Join Date: Apr 2010 Posts: 101 Re: How to disable Quicktime plugin for IE 10 OK! No, for 32 bit Windows, there are minor edits for that. I don’t want to confuse by just explaining the edits. I’d rather ask you to replace the entire command with: Quote: reg export "HKLM\SOFTWARE\Classes\CLSID\{4063BE15-3B08-470D-A0D5-B37161CFFD69}" D:\qt_plug-in\qt1.reg reg delete "HKLM\SOFTWARE\Classes\CLSID\{4063BE15-3B08-470D-A0D5-B37161CFFD69}" /f reg export "HKLM\SOFTWARE\Classes\CLSID\{CB927D12-4FF7-4A9E-A169-56E4B8A75598}" D:\qt_plug-in\qt2.reg reg delete "HKLM\SOFTWARE\Classes\CLSID\{CB927D12-4FF7-4A9E-A169-56E4B8A75598}" /f reg export "HKLM\SOFTWARE\Classes\CLSID\{02BF25D5-8C17-4B23-BC80-D3488ABDDC6B}" D:\qt_plug-in\qt3.reg reg delete "HKLM\SOFTWARE\Classes\CLSID\{02BF25D5-8C17-4B23-BC80-D3488ABDDC6B}" /f reg export "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\3F9E7EA97A1AEE54490637032025DEF9" d:\qt_plug-in\qt4.reg reg delete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\3F9E7EA97A1AEE54490637032025DEF9" /f Reply With Quote Reply

How to disable "add-ons" pop up in Internet Explorer 9

How to disable "add-ons" pop up in Internet Explorer 9 I am using windows 7 operating system and Internet Explorer 9 Beta. I realize the reason of the "Speed up startup as well as browsing through disabling add-ons" pop-up in Internet Explorer 9 Beta, however it is pretty irritating in addition to I find it all time I go to the browser. How do I make it off, thus it does not show again? So please help me out to solve this. desperately waiting for any reply. Thanks! Reply With Quote #2 Old 13-02-2011 Sheenas Sheenas is offline Member Join Date: Nov 2009 Posts: 880 Re: How to disable "add-ons" pop up in Internet Explorer 9 To disable add-ons on IE9 you have to follow these steps: 1. You have to open settings selection accessible on top-right side of the Internet Explorer 2. Press on “Manage Add-ons” choice accessible in the menu list 3. Choose the particular add-on which is not required for your effort or is/are not necessary. Now press on the disable key accessible on the similar window. If you would like to enable a few add-ons after that you be able to do the same from the similar window You are not able to disable multiple add-ons on single press. As a result you will have to disable add-ons one at a time. Reply With Quote #3 Old 13-02-2011 Sean J's Avatar Sean J Sean J is offline Member Join Date: Feb 2008 Posts: 631 Re: How to disable "add-ons" pop up in Internet Explorer 9 I agree that this is a very irritating notice. The answer is supposed to not be to raise the time-out "a suitably long time that the dialog won't come back." That is strange. The point is supposed to be to automate as well as make LESS work for clients; not more. If I require dealing with this type of irritation "for a suitably long time," I will now switch browsers. I have sufficient clicks in my every day routine. Please either a) get out of this altogether, or b) install a SW with that permits a user to switch it off. Reply With Quote #4 Old 13-02-2011 rashmi_ay rashmi_ay is offline Member Join Date: Nov 2009 Posts: 655 Re: How to disable "add-ons" pop up in Internet Explorer 9 To Disable the Add-Ons on your Internet Explorer 9 Beta browser you have to First of all have to press on the Settings image in right top part as well as choose Manage Add-Ons from the Menu. Manage Add-Ons window will show, where you are able to observe the entire toolbars as well as Extensions, Search Providers, Accelerators at present installed on your IE 9 Beta browser. At that moment go to Show alternative as well as choose all add-ons. In the right part panel, choose the add-ons, you would like to disable. At the Bottom, in the Window you be able to vision the common information regarding the selected Add-ons. Now press the Disable key at the bottom right side to Active or Dis-active the Add-one. In addition to you are completed now. Then press the Close key to return to the Internet Explorer window. Reply With Quote #5 Old 22-05-2011 clshades clshades is offline Member Join Date: May 2011 Posts: 4 How to disable "add-ons" pop up in Internet Explorer 9 The 2 posts regarding the question ARE NOT the answer. The question is how do we disable the actual popup from EVER popping up again. It's not about managing the addons it's about stopping the RETARDED popup from EVER entering my screen again. Next time it pops up click disable addons button then increase the time to show bar to 10 seconds. (its in there somewhere) This means the browser needs to take longer than 10 seconds to pop up the notification bar. At least this is what I have found out so far in my searches. There is no way to DISABLE it completely... not even with group policies. Reply With Quote #6 Old 27-11-2011 IkariWarrior IkariWarrior is offline Member Join Date: Nov 2011 Posts: 1 Re: How to disable "add-ons" pop up in Internet Explorer 9 Unistall the tool bar program. Control Panel -> Uninstall a program -> (find the program, most likely label something tool bar)) double click on program and unistall. Bottom will not pop up again. Hope this helps and have a nice day. Reply With Quote #7 Old 27-11-2011 clshades clshades is offline Member Join Date: May 2011 Posts: 4 Re: How to disable "add-ons" pop up in Internet Explorer 9 Again.. not the answer or the solution. These are sometimes addons required for normal use. Things like flash etc. Uninstalling is an incorrect answer. Have a nice day. Reply With Quote #8 Old 28-11-2011 Riker Riker is offline Member Join Date: Nov 2011 Posts: 2 sad Re: How to disable "add-ons" pop up in Internet Explorer 9 I have the same problem. Let me try to clarify, as the answers here to fore are answering the wrong question. IE has a system pop-up that tells the user that disabling toolbars will speed up IE. It appears at the bottom-right of the screen. I (and the original inquiry) is aking how to disable this from the Windows IE. I have the toolbars that I want in place. I do not want to alter or remove my toolbars . I want to remove the notice that asks me to remove them. This notice comes up at every restart for every user. All users have the toolbars that they want. Windows IE does NOT need to remind us that removing a handy toolbar will speed up IE (that seems to be Microsoft's problem).

unable to remove mp3tube search toolbar from navigation bar of Mozilla Firefox 6

unable to remove mp3tube search toolbar from navigation bar of Mozilla Firefox 6 I had installed mp3tube toolbar because it is a part of yahoo and I use yahoo and i have windows 7 operating system. It was working properly I was using it from last many days but from last week was not working properly so I deleted it but it’s still there and because of this I can’t use my Mozilla Firefox 6 it’s very much annoying me. Guys please give some suggestion how I can get rid of this problem? Reply With Quote #2 Old 03-01-2012 Chopfyt Chopfyt is offline Member Join Date: Mar 2011 Posts: 370 re: unable to remove mp3tube search toolbar from navigation bar of Mozilla Firefox 6 Looking at the situation, I am suggesting following solution which you can try to fix the matter of yours.You should click on the Start button and go for Control Panel and click on Internet Option and look for the mp3tube references, if you have found that then you should remove from the computer of yours. you should delete program_files\mp3tube, \music\mp3tube, and program_files\mozilla firefox\extensions\mp3tubetoolbar.com folder. Reply With Quote #3 Old 03-01-2012 Deverell Deverell is offline Member Join Date: May 2011 Posts: 336 re: unable to remove mp3tube search toolbar from navigation bar of Mozilla Firefox 6 Second thing I wanted to tell you that remove pref entries. For that purpose you have to perform following steps. You have to click on Firefox button and click on Help. From there go for troubleshooting information and open the containing folder and after that open prefs.js and user.js. In prefs.js you will have 3 entries for mp3tube which next of each other, you have to delete the same. In user.js you will need to delete line like keyword.url with mp3tubetoolbar.com. Once done you have to launch the Firefox on your computer and go for about:config and look for keyword.url. you have to right click on the same and click on Reset. Reply With Quote #4 Unread 26-03-2012 seako seako is offline Member Join Date: Mar 2012 Posts: 1 re: unable to remove mp3tube search toolbar from navigation bar of Mozilla Firefox 6 1. type in RUN %APPDATA%\Mozilla\Firefox\Profiles 2. search for "prefs" & "user" (.js) *open both files in notepad (or any text editor) *search for keyword.url you will find : user_pref("keyword.URL", "http://mp3tubetoolbarsearch.com/?prt=pinballtb02ff&Keywords="); *replace with user_pref("keyword.URL", "http://www.google.com/search?ie=UTF-8&oe=utf-8&q="); .....if step 1 & 2 still doesn't work, * open firefox, in the address bar type about:config (enter) * in the search tab type keyword.url * right click->modify * change the value to http://www.google.com/search?ie=UTF-8&oe=utf-8&q= *OK good luck^_^

Red x on some photographs on facebook

Red x on some photographs on facebook I am unable to view certain photographs on facebook. It shows a weird Red X on the place where the photograph is supposed to be shown. I am not able to make out what actually the issue is. Please help me out of this. The only thing I could notice common in all these images is that the addresses of these images had xx. Photos address. Reply With Quote #2 Unread 28-03-2012 Hadriel Hadriel is offline Member Join Date: Jun 2011 Posts: 565 Re: Red x on some photographs on facebook This is a very common issue these days. Please try making the following changes. It might help. Re-install internet explorer Try clearing the caches Make sure compatibility view is disabled Make sure the active x boxes are enabled. Let me know if it works; Might turn useful for others. Reply With Quote #3 Unread 28-03-2012 AliyaK AliyaK is offline Member Join Date: Jul 2011 Posts: 291 Re: Red x on some photographs on facebook Please try changing the browser or the computer. Just as a diagnostic media to find out where the issue exactly is. Reply With Quote #4 Unread 28-03-2012 Haleema Haleema is offline Member Join Date: May 2011 Posts: 361 Re: Red x on some photographs on facebook Also, if these photos are uploaded by you, please delete them and reinstall. What happens is, there is a pointer to the location of the image. Sometimes, the image is not correctly uploaded and the location remains empty. The empty location is indicated by a red ‘x’ which is nothing but a default view. Reply With Quote #5 Unread 28-03-2012 Daniel90 Daniel90 is offline Member Join Date: Mar 2012 Posts: 15 Re: Red x on some photographs on facebook None of these worked. I do understand that a red ‘x’ denotes an empty location. But what I am wondering is, if one image can be located why not the other. And yeah, the issue is not only with the images I uploaded. The updates that come on our wall when someone else uploads the image also show the same problem. Reply With Quote #6 Unread 28-03-2012 Rhesa Rhesa is offline Member Join Date: Nov 2010 Posts: 350 Re: Red x on some photographs on facebook It is an http/https issue which has occurred because of some internal changes on the site. The problem is, if facebook doesn’t load as https (secure site) the photos cannot be viewed and appear as blank pages or the ‘x’ that you were talking about. The ‘xx’ peculiarity in the address that you were talking about is an indication to this change. The issue will soon be resolved by facebook itself. What you are facing now is nothing but transitional problems. Keep patience for now.

Facebook Sending Zynga Slingo Gifts

Facebook Sending Zynga Slingo Gifts This is a bit strange issue I noticed while playing Zynga Slingo. I had seen that those friends which are not playing Zynga Slingo are sending me gifts. I am not able to figure how they do that. I had asked some of them that how can they send me coins if aren't playing the game. This is really a kind of weird thing going on. I had played the same some days before and now when I open it I had seen lots of gift request. Does Zynga Slingo has any kind of option in it where we can receive or send gifts without playing the same. Thanks. Reply With Quote #2 Unread 28-03-2012 Elazar Elazar is offline Member Join Date: Nov 2010 Posts: 352 Re: Facebook Sending Zynga Slingo Gifts No that is not really possible. This are social networking games which are connected with players who are playing to share gifts. This can be a type of spam thing does by this site mostly gain fame. They just keep spamming to capture users interest. Reply With Quote #3 Unread 28-03-2012 Hadriel Hadriel is offline Member Join Date: Jun 2011 Posts: 565 Re: Facebook Sending Zynga Slingo Gifts Zynga Slingo is a nice game, but I had not noticed that thing which you had mentioned. There are friends from your profile who are shown on the left. They also appear sometime in the mid game to offer some help. Did you checked properly that they are really playing the game. If even they liked the same once or played it anytime it send gifts on behalf of the same. This can be counted under spamming but till the end there is no issue you can ignore the same. If you are getting a lot more request you can try contacting Zynga for the same. Or else you are getting free gifts so you can simply enjoy the same. Reply With Quote #4 Unread 28-03-2012 Carita Carlos Carita Carlos is offline Member Join Date: Jun 2011 Posts: 512 Re: Facebook Sending Zynga Slingo Gifts That is not really a issue. You had not noticed that in detail. There can be friends which are in the list of your friends from where you are getting those gift request. Many people when the game ask to share something click on send all and sends the gift to those they do not know. You might be getting something like that. Reply With Quote #5 Unread 28-03-2012 Roxanne's Roxanne's is offline Member Join Date: Jul 2011 Posts: 257 Re: Facebook Sending Zynga Slingo Gifts There are common issues with zynga spamming stuff. I do not understand that this is done by Zynga or other players. I had seen many time unwanted updates coming to my profile which increase the list of messages. I had ignored many zynga games in last few months. There were constant updates which fill up my wall and it takes too much time to get rid of those. Zynga should make some kind of simple games where there are nothing much to share. For each and every thing happen in the game, Zynga needs top post that on wall. You cannot imagine how I manage to play such games on a slow internet connection. I had seen this is increased in every game. Reply With Quote #6 Unread 28-03-2012 Kiran25 Kiran25 is offline Member Join Date: Aug 2011 Posts: 372 Re: Facebook Sending Zynga Slingo Gifts That is the way they work. It can be a kind of business strategy where they track user interest. All zynga games ask you to share several things on your wall which is seen by other friend also and indirectly this is a kind of investment. Reply With Quote #7 Unread 28-03-2012 PhoebeM PhoebeM is offline Member Join Date: Jul 2011 Posts: 325 Re: Facebook Sending Zynga Slingo Gifts I like Zynga games. They are easy to play and provide nice competition with other friends online. All I want to know that when you do not like those request you can ignore them and enjoy the game. Reply With Quote Reply

What are Zynga Slingo x2 and x3 Bonus

What are Zynga Slingo x2 and x3 Bonus While playing Zynga Slingo I had seen many time x2 or x3 type of icons in the slot. When I click they disappear. Do I really collecting them or they are some kind of extra thing which is used while playing. What does they benefit. Does collecting them reduces my points. I need some basic tips also in earning high in Zynga Slingo. Reply With Quote #2 Unread 28-03-2012 CamilleT CamilleT is offline Member Join Date: Jul 2011 Posts: 360 Re: What are Zynga Slingo x2 and x3 Bonus Those are collected when you click on them. You can see them on the left top size where all coins are collected. It increases your level or earning. Once you collect them you will get bonus on the first spin. This will also effect your time bonus in the game. Reply With Quote #3 Unread 28-03-2012 KirtiPatel KirtiPatel is offline Member Join Date: Jul 2011 Posts: 280 Re: What are Zynga Slingo x2 and x3 Bonus I had got those many. They are earnings and boost your coins. They are not actually find a number of time. If you are more doubts then you can simply refer to Zynga Slingo FAQ. This is found in the official site which has answer to many question like this. It looks that you are new to the gameplay. Anyhow the numbers those appears in the game are random and there is no way to control them. It is recommended that if you need a high score you can replay the existing level a number of time without wasting your energy. Somehow you might click the highest score beating your competitor. Reply With Quote #4 Unread 28-03-2012 AliyaK AliyaK is offline Member Join Date: Jul 2011 Posts: 291 Re: What are Zynga Slingo x2 and x3 Bonus It is really a boring game sometime. I tried to play the game and found that it consumes more time than others. Sometime many of my chances are wasted and even still I cannot get full chance. Is there any cheats for this game. Reply With Quote #5 Unread 28-03-2012 DamarisK DamarisK is offline Member Join Date: Jun 2011 Posts: 428 Re: What are Zynga Slingo x2 and x3 Bonus No Zynga Slingo does not has any cheats and if you try to do something you can get banned. The game is nice to play with simple steps. Why do you need cheats for the same. I will recommend to try other games of Zynga also. There is a faq available on the official site which can clear a number of doubts related to the game. There is no need to find any other way to increase your earning. There is a way by which you can get instant bonus, that is if your friend share a maximum with you. Reply With Quote #6 Unread 28-03-2012 Haleema Haleema is offline Member Join Date: May 2011 Posts: 361 Re: What are Zynga Slingo x2 and x3 Bonus It is a easy game, I had enjoyed the same for a while. Those bonus points are just for fun to keep to stick to the games. Zynga also has a business strategy here where it ask you to purchase when you finish the chances in game. Reply With Quote

What does +2 or +3 means which appear after spin in Zynga Slingo

What does +2 or +3 means which appear after spin in Zynga Slingo Has anyone notice this or not. While playing Slingo I can see some +2 or +3 in slots which disappears soon. This are shown many time in between. They do not stay for longer time and before clicking it it goes. I am not able to understand what it does actually. Does anyone knows about it. Thanks. Reply With Quote #2 Unread 28-03-2012 Beatricef Beatricef is offline Member Join Date: May 2011 Posts: 311 Re: What does +2 or +3 means which appear after spin in Zynga Slingo There are many similar doubts related to the game. I had seen the same appears and some of the addons are really out of my mind. The game is simple to play but nice and generates more interest if friends around you gain more and goes above you. That surely be a kind of addon for multiplying your points in the game. I had not noticed what happen to the score when they appear. I will try today and will post if found any valid answer for the same. Reply With Quote #3 Unread 28-03-2012 FarhaS FarhaS is offline Member Join Date: May 2011 Posts: 400 Re: What does +2 or +3 means which appear after spin in Zynga Slingo It is a kind of multiplayer which is used on the coming choice of ball. If you ignore the same it is added to the regular one. It just offer you to gain some extra points. Reply With Quote #4 Unread 28-03-2012 Cauvery Cauvery is offline Member Join Date: May 2011 Posts: 301 Re: What does +2 or +3 means which appear after spin in Zynga Slingo I can give a bit detail highlight on the same. The game is nice to play and addons in between let you earn easy point and more chances. Those are called a multiplayer. They just add your score as per the number which is shown on the slots. You might have not noticed that. When you see that your score is added 2 times or 3 times as per the figure appeared. It appears in between the game and there is no right assumption available. So the next time when you see that just check your score. It will be multiplied with the figure that appear on the screen. Reply With Quote #5 Unread 28-03-2012 Suigetsu Suigetsu is offline Member Join Date: Mar 2011 Posts: 435 Re: What does +2 or +3 means which appear after spin in Zynga Slingo That was really a nice output on the same. But does that really add the points. The score in the game game changes too randomly that it is hard to guess what addon provides you what kind of update.

Slingo is the same what was played long time before

Slingo is the same what was played long time before I had seen this game a very long time before. There was a similar game available and it was called as Slingo also. Does this is the same kind of game or not. I do not think so. The game has similar gameplay but it has lot more additions. Reply With Quote #2 Unread 28-03-2012 Hadriel Hadriel is offline Member Join Date: Jun 2011 Posts: 565 Re: Slingo is the same what was played long time before I am not really sure about what you are talking about. There are tons of similar game on web which matches with each other. What I know that Zynga and Slingo are under partnership and the game is developed by them. Zynga with Slingo has made the game much better and offer easier gameplay. The game is liked widely and people do enjoy it. And really who cares about which similar game was available long time before or not. Slingo is a nice game and it is really a huge hit. There should be more power addons in the game what I recommended. Sometime it become super tough to gain better points. Reply With Quote #3 Unread 28-03-2012 Aadidev Aadidev is offline Member Join Date: May 2011 Posts: 216 Re: Slingo is the same what was played long time before It really does not matter from what the game is inspired. I had heard that Slingo was a old game which was played on Aol. And today the company has tie up with the game company to develop and enhance it much more. Reply With Quote #4 Unread 28-03-2012 Roxanne's Roxanne's is offline Member Join Date: Jul 2011 Posts: 257 Re: Slingo is the same what was played long time before Zynga Slingo is nice game. If you do not like to play that on facebook you can play on slingo site. There are number of challenge stuff offered with many other game. Slingo is merged with many other games which has made it more attractive. Like 5 card slingo, mixed matrix, slingo brasil, slingo majhong, slingo solitaire, etc. There are wide variety of game you can play on the site. I had seen some of the games are much better than Zynga Slingo. I will recommend you to just have a look on the same. Reply With Quote #5 Unread 28-03-2012 Kiran25 Kiran25 is offline Member Join Date: Aug 2011 Posts: 372 Re: Slingo is the same what was played long time before What game did you played. Is that named as Slingo. It is possible because some time ago there were no zynga tie up with slingo and it was played on some social sharing websites. But today it is more enhanced with multiple support. You are aware that every Zynga games comes with purchase of virtual material. This is somewhat I really do not enjoy. Instead of that Zynga must give everything free or charge on game downloads. Even in Slingo when the balls are ended you can see a popup for buying stuff. Don;t you agree that it is not fare to spend money on such. Zynga's many games are money motive only. Reply With Quote #6 Unread 28-03-2012 PhoebeM PhoebeM is offline Member Join Date: Jul 2011 Posts: 325 Re: Slingo is the same what was played long time before That is right to some extent. But you can also enjoy the free version by sharing and asking for help from your friends. Reply With Quote #7 Unread 28-03-2012 CamilleT CamilleT is offline Member Join Date: Jul 2011 Posts: 360 Re: Slingo is the same what was played long time before Zynga offer many games and among them there are wide purchased made in farmville, cityville, or poker. So this is really the users choice what needs and what he does not. There is no compulsion on you to purchase those stuff. It is entirely your choice whether you want or not want. Reply With Quote

invalid source port 32784 via Linksys E4200

Unsolicited response from host with invalid source port 32784 via Linksys E4200 After I replaced my old router with this new Cisco Linksys E4200, I am facing a huge technical problem. First of all let me tell you that I am running a firmware update version 1.0.02 build on this Linksys E4200 router. The problem is that at least every one minute I can notice that my router keeps on sending me unsolicited DNS message to the IPV4 multicast address 01:00:5e:00:00:fb. The message is sent using the destination IP address of 224.0.0.251. This unsolicited message is nothing but just a DNS response with source port 32784. Transaction ID 0, flags 0x8400, questions 0, answer RRs 2, authority RRs 0 and additional RRs 1. Can anyone explain what exactly is going on, I am totally clueless? Reply With Quote #2 Unread 26-03-2012 Kiran25 Kiran25 is offline Member Join Date: Aug 2011 Posts: 372 Re: My PC receives an unsolicited response from host with invalid source port 32784 through Linksys E4200 router I do sometimes receives these unsolicited messages but in my system whenever I receive such message my desktop pc however records or you can say logs an error in the machine like “Feb 23 07:39:22 sauterws02 avahi-daemon[1067]: Received response from host 10.146.9.1 with invalid source port 32784 on interface 'eth0.0”. for your knowledge let me tell you that the host address i.e. 10.146.9.1 is just the router’s IP address. Most interestingly I can also see these messages on the wireless link from my laptop. I am sure that this E4200 is just trying to make sure that there is no such old information with its name existing and therefore due to this reason it is generating these DNS messages in such wrongly way. Reply With Quote #3 Unread 26-03-2012 Roxanne's Roxanne's is offline Member Join Date: Jul 2011 Posts: 257 Re: My PC receives an unsolicited response from host with invalid source port 32784 through Linksys E4200 router Quote: Transaction ID 0, flags 0x8400, questions 0, answer RRs 2, authority RRs 0 and additional RRs 1. Can any one explain what exactly is going on, I am totally clueless. By looking at your above statements I can only say that both the two answer somehow relate to the router. one of them must have the Name, type A (host address), class 1 (IN), cache flush true, time to live 1 minute, data length 4, and the address of the router. in my case the additional record is for Cisco18738.local, type NSEC, class IN, cache flush true, time to live 1 minute, data length 5, next domain name Cisco18738.local, RR type A (host address). Reply With Quote #4 Unread 26-03-2012 Carita Carlos Carita Carlos is offline Member Join Date: Jun 2011 Posts: 512 Re: My PC receives an unsolicited response from host with invalid source port 32784 through Linksys E4200 router Hello my friend, forget about the researches why don’t to look out for a proper solution. I had the exact same problem but instead of digging up the issue I just went on for a proper solution and now at last I am here with it. Recently I noticed that there is a new release for the E4200 firmware version 1.0.04 build. This latest firmware release is somehow being used for correcting those minor issues without even listing them. But take a note that, loading this firmware will not solve all other issue excluded from this thread. Reply With Quote #5 Unread 26-03-2012 Hadriel Hadriel is offline Member Join Date: Jun 2011 Posts: 565 Re: My PC receives an unsolicited response from host with invalid source port 32784 through Linksys E4200 router I need to tell and give you two most important suggestion and information: If you are aware of the internet draft, you can find that the multicast DNS implementations should definitely silently ignore any kind of multicast DNS responses that are actually received, where you can notice the source UDP port is not 5353. I guess your avahi-daemon do not fulfills the requirements. Another thing I would like to tell you is that better you at least once try to contact the Support center; you need to contact Linksys support. Reply With Quote #6 Unread 26-03-2012 Aadidev Aadidev is offline Member Join Date: May 2011 Posts: 216 Re: My PC receives an unsolicited response from host with invalid source port 32784 through Linksys E4200 router I am very much sure that the avahi daemon is not at all silently ignoring these packets; therefore I personally believe that it is the main reason for all mess up. I am not sure but I guess Cisco themselves are using these packets for the proprietary functions so therefore they will never change or modify them. Reply With Quote #7 Unread 26-03-2012 Elazar Elazar is offline Member Join Date: Nov 2010 Posts: 352 Re: My PC receives an unsolicited response from host with invalid source port 32784 through Linksys E4200 router Quote: I am very much sure that the avahi daemon is not at all silently ignoring these packets, therefore I personally believe that it is the main reason for all mess up. I am not sure but I guess Cisco themselves are using these packets for the proprietary functions so therefore they will never change or modify them. But if Cisco is using the these packets for the proprietary functions surely they are violating the mDNS specifications. As already been said that there is a more possibility that it’s a bug. Reply With Quote #8 Unread 28-03-2012 Suigetsu Suigetsu is offline Member Join Date: Mar 2011 Posts: 435 Re: My PC receives an unsolicited response from host with invalid source port 32784 through Linksys E4200 router

Will there be more than 5 Worlds in Zynga Slingo

Will there be more than 5 Worlds in Zynga Slingo I am playing Zynga Slingo and really enjoying it. I want to know that will there be more than 5 Worlds in the game. The game looks really very short when played completely. I am hoping for adding up more additions in the game. Does anyone know of any upcoming information. Reply With Quote #2 Unread 28-03-2012 KirtiPatel KirtiPatel is offline Member Join Date: Jul 2011 Posts: 280 Re: Will there be more than 5 Worlds in Zynga Slingo Till yet there is nothing officially declared by Zynga about any updates for the game. If there will be additions we might get informed on the game page. You might need to wait until the time comes. Zynga Slingo is quiet popular game which I think might get more support in the coming time. The game provides a similar time of gameplay. I recommend to change this a bit by offering some easy addons to gain more coins in the game. Also there are less chances to gain multiple energy at a time. The power ups that are provided in the game is less. There should be more so that we can struck a better point in the most less time consumed. Reply With Quote #3 Unread 28-03-2012 AliyaK AliyaK is offline Member Join Date: Jul 2011 Posts: 291 Re: Will there be more than 5 Worlds in Zynga Slingo Yes it is correct. I too agree to go with more worlds and power ups. Zyngo Slingo provides very less or basic power up which are not fulfilled to reach a high score. And also there is no power ups that you can purchase. Reply With Quote #4 Unread 28-03-2012 DamarisK DamarisK is offline Member Join Date: Jun 2011 Posts: 428 Re: Will there be more than 5 Worlds in Zynga Slingo Slingo has those default 5 worlds only. Yet no confirmation is received. 69 power-ups in the current game is very low in which power up vision is totally useless. I think Zynga must remove this and add a much better power instead of this. Like some which can predict the numbers coming. Also Zynga must at a high number of extra balls in the game. Sometime it become quiet difficult to get full board. Right now the game offers a very basic gameplay. And I wonder that will there be any kind of pc version for this game. This would be awesome to have a full fledged pc game with tons of power and worlds. Reply With Quote #5 Unread 28-03-2012 Haleema Haleema is offline Member Join Date: May 2011 Posts: 361 Re: Will there be more than 5 Worlds in Zynga Slingo That can be just imagination. There are no news about that. According to me 5 words are enough for this game. There should be a newer version available with different gameplay. Reply With Quote #6 Unread 28-03-2012 FarhaS FarhaS is offline Member Join Date: May 2011 Posts: 400 Re: Will there be more than 5 Worlds in Zynga Slingo Even I agree that there should be more than 5 worlds and power-up. Atleast zynga can try to give more powerups in the game. I had not noticed addons yet. The game is easy to play but powerups help to earn better. It is really lucky that they do not put any kind of time limit on the game. Reply With Quote

Energy Cost for playing Zynga Slingo round

Energy Cost for playing Zynga Slingo round Zynga Slingo is a nice game. But there is a weird issue I had seen. When I start the game I have to pay 9 energy while my friend has to pay just 7. How that can be possible if we are playing the same game at the same time. Does there are any kind of stuff or hidden statistics on which base the energy is charged. I am really confused and hope that there will be a sensible answer for the same. Reply With Quote #2 Unread 28-03-2012 Deverell Deverell is offline Member Join Date: May 2011 Posts: 336 Re: Energy Cost for playing Zynga Slingo round The same happens to me also. I had not noticed this but my friend told me that your account cost 10 energy when you start the game while he has to give 8 only. This is really frustrating because the energy wipes out very soon when the game starts. I do not understand what is the reason behind the same. Does this includes any kind of play time that means the number of time you play the game. Sometime I had seen Slingo charges 5 energy to spin sometime. Does I am the only who is overcharged. I tried contacting Zynga for the same they send me the link of faq and told to read. Still trying to find the answer for the same. Reply With Quote #3 Unread 28-03-2012 Suigetsu Suigetsu is offline Member Join Date: Mar 2011 Posts: 435 Re: Energy Cost for playing Zynga Slingo round This is a common but. We can say this as a bug because we do not really know how it happens. I had seen that my friend losses 10 energy per game while I just need to give 6. There is also no way to get extra energy in the game. Reply With Quote #4 Unread 28-03-2012 Rhesa Rhesa is offline Member Join Date: Nov 2010 Posts: 350 Re: Energy Cost for playing Zynga Slingo round Till yet there is no valid answer. There might be some issue but I am not sure that this is a bug or not. It depends on the profile or the game you play. If you use up too many power-ups then you might charged more. It is not easy to conclude on what basis those energy are charged. But once they are ended you will have to pay to buy them. This is really wired. They must give up atleast this for free. Every thing in Zynga Slingo is charged. Even the balls. They power-ups are less and if you love to play for long hours then keep your credit card ready. Reply With Quote #5 Unread 28-03-2012 Elazar Elazar is offline Member Join Date: Nov 2010 Posts: 352 Re: Energy Cost for playing Zynga Slingo round I am also struggling to find the same answer that how much does Zynga Slingo cost energy and on what basis. There are my friend. Some of them are charged higher and some of them lower. Reply With Quote Reply

Zynga Slingo Freezes in the End

Zynga Slingo Freezes in the End I had found a note on zynga site about this bug. It is about the game freezing issue. The game freeze when a stage is completed and it does not goes to the award slot part. Till yet I had not noticed this issue. Is anyone facing it. Many also complains about the popup screen which disappears when you end a round. Reply With Quote #2 Unread 28-03-2012 Aadidev Aadidev is offline Member Join Date: May 2011 Posts: 216 Re: Zynga Slingo Freezes in the End I had faced this issue just once when the game freezes. I refreshed my page and all earnings are gone. After that till yet there is no issue. It might related to some of the servers of this game not with all. If you have any of that major issue you can try to contact Zygna and ask them about the same. Reply With Quote #3 Unread 28-03-2012 Hadriel Hadriel is offline Member Join Date: Jun 2011 Posts: 565 Re: Zynga Slingo Freezes in the End I like to play this game. Rightnow you might not have got the issue, but because of constant freezing I am going to soon drop the idea of playing it. This game is really giving me hard time. The game works fine for some levels but freezes and after that. I can do nothing. Every time when I get a high number hit the game freezes. This is very annoying. I am not going to play this game back again unless this issue is fixed entirely. I had reported the same to Zynga. They said they are working on the same. There are almost 2 days gone now. Does this can be browser related issue. I am using chrome here. Other games work fine but the issue is same with some other flash games. Reply With Quote #4 Unread 28-03-2012 Carita Carlos Carita Carlos is offline Member Join Date: Jun 2011 Posts: 512 Re: Zynga Slingo Freezes in the End This cannot be really browser issue unless you get the same issue is every flash game you play. For start you can try avoiding the game for some couple of days. This issue is common and might be fixed soon. Reply With Quote #5 Unread 28-03-2012 Roxanne's Roxanne's is offline Member Join Date: Jul 2011 Posts: 257 Re: Zynga Slingo Freezes in the End But I think there should be update on this. If the game is facing issue, Zynga must update it users that the game is going freeze or is buggy. They do not respond soon on the issues. I had faced the issue when I was going to purchase some extra balls. The game just hanged and nothing happened. This is just a waste of money. I had also reported the same to zynga and will wait back for a active response from them. Reply With Quote #6 Unread 28-03-2012 Kiran25 Kiran25 is offline Member Join Date: Aug 2011 Posts: 372 Re: Zynga Slingo Freezes in the End If you are having a good internet connection and then you are facing the issue then you can blame zynga. Last week there was some issue with my isp and I found the game lags in between and sometime my browser crashed. I thought this is the game issue. But later on I came to know that my isp was facing issue and maximum flash games were not working at all. Now things are restored and the game is working fine. Till now there is no freezing issue appeared. There might something you can check from your end also. Reply With Quote #7 Unread 28-03-2012 PhoebeM PhoebeM is offline Member Join Date: Jul 2011 Posts: 325 Re: Zynga Slingo Freezes in the End Simply report to Zynga. No need to worry about the same. If there is a issue they will fix that out soon and also update your about the same. Reply With Quote

WPS Vulnerability on Linksys Routers

WPS Vulnerability on Linksys Routers Has anyone noticed a issue of vulnerability occurred in wps protocol which is widely used in many routers of Linksys. The flaw is related to wps protocol used in the routers. This exploit can cause major issue if you are using the same on a wide area network. Many modem wifi router is equipped with the wps protocol which comes with flaw in it. So I just want to confirm that does firmware update can fix this out. Reply With Quote #2 Unread 28-03-2012 CamilleT CamilleT is offline Member Join Date: Jul 2011 Posts: 360 Re: WPS Vulnerability on Linksys Routers Even I had heard about the flaw. The flaw can open security hole in the router. This hole cannot be fixable due to some flaw and I am not sure any firmware can make this work. Other things you cannot turn off wps because it might insecure your entire network. Rightnow the manufacturers are not giving out any updates in dealing with the existing flaw. Reply With Quote #3 Unread 28-03-2012 KirtiPatel KirtiPatel is offline Member Join Date: Jul 2011 Posts: 280 Re: WPS Vulnerability on Linksys Routers There are no words from the manufacturer about the vulnerability in the routers. Anyhow it is wrong to entirely disable the wps. It would be better if Cisco can provide any better highlight on the same. Till yet users are only discussing the topic among them. The only cure that is found till yet is disabling the wps for sometime unless a working patch is related to fix the vulnerability. I do not understand when will this happen. There are number of users world wide you are using this router and might not aware about the exploit. Reply With Quote #4 Unread 28-03-2012 AliyaK AliyaK is offline Member Join Date: Jul 2011 Posts: 291 Re: WPS Vulnerability on Linksys Routers Search the official site properly. There is a patch available for the same. You can use that to get rid of bugs. You have to read properly what information related to this is provided on the manufacturers website. Reply With Quote #5 Unread 28-03-2012 DamarisK DamarisK is offline Member Join Date: Jun 2011 Posts: 428 Re: WPS Vulnerability on Linksys Routers There are many resources on the web which can guide you about what does the router having issue. If this is a serious vulnerability then you will need to stay alert before you are affected. I had gone through some of the blogs on web which confirm this. At start it recommended to keep the wps off. There should be a working patch for the same coming soon. Also there are no models disclosed yet. Might this are new models which are out in the recent months. If there are better firmware available you can simply run the update as needed. Reply With Quote #6 Unread 28-03-2012 Haleema Haleema is offline Member Join Date: May 2011 Posts: 361 Re: WPS Vulnerability on Linksys Routers I had also gone through some post related to wps hole. It is recommended that you must be seriously concern about this if you have wifi network setup in your office. Reply With Quote Reply

Is there a way to get 1 Number per ball in Zynga Slingo

Is there a way to get 1 Number per ball in Zynga Slingo Now I am getting really annoyed with this. I spin 4 times and not even received a single hit. Is there a way by which I can get atleast 1 number on every ball, so that they are not wasted and zyngal will not expect me to buy them. I had replayed the game for more than 6 times and still no luck. Reply With Quote #2 Unread 28-03-2012 Rhesa Rhesa is offline Member Join Date: Nov 2010 Posts: 350 Re: Is there a way to get 1 Number per ball in Zynga Slingo No there is no way for the same. The game is nice to play but you can use your energy if you are very close to full board. I had got ended when my last energy was used up only on single number pending on the board. This was very frustrating. The game works on its own. Sometime you receive many blank spin while sometime you can be lucky to get 4 to 5 numbers at a time. This balance your chances of playing the game. You can try playing at different time. Sometime you earn very easily while sometime it takes lot time to go at the end or break any record. Reply With Quote #3 Unread 28-03-2012 Suigetsu Suigetsu is offline Member Join Date: Mar 2011 Posts: 435 Re: Is there a way to get 1 Number per ball in Zynga Slingo I am too looking for finding some way by which I can get atleast one number in every spin. There are option when we receive more numbers in a single spin. I think Zynga should add more powerups. Reply With Quote #4 Unread 28-03-2012 Chopfyt Chopfyt is offline Member Join Date: Mar 2011 Posts: 370 Re: Is there a way to get 1 Number per ball in Zynga Slingo I am sure there are no cheats for this game. The game is nice and good time pass. I had seen a guide of this game which is on the web. The guide shows information on different level and how play the game. The power up are limited that I agree. The balls are on the based of the game design. They appear on its own and there is no way you can judge or control the number appearing on the screen. Zynga Slingo is a easy game you can play and there is no need to go for such easy tactics. Reply With Quote #5 Unread 28-03-2012 Deverell Deverell is offline Member Join Date: May 2011 Posts: 336 Re: Is there a way to get 1 Number per ball in Zynga Slingo Many times you can get enough numbers in Slingo but sometime it becomes a bit annoying to get a full board. The game is nice and easy to play. Reply With Quote Reply

What can I do to fix Seagate 7200.11 Bricked hard disk q

What can I do to fix Seagate 7200.11 Bricked hard disk q Is there a way by which I can fix a bricked hard disk. The disk shows up super slow speed and sometime does not work at all. I had seen the issue lies with the disk motor which is not spinning at full speed. This is simply a hard fault. How to check this and what measure can I take here. Reply With Quote #2 Unread 28-03-2012 FarhaS FarhaS is offline Member Join Date: May 2011 Posts: 400 Re: What can I do to fix Seagate 7200.11 Bricked hard disk q Not sure about much hardware thing, but I think you are going to loose warranty if you open it or make any changes. Simply go for a replacement if the disk is under warranty. The disk motor or any other stuff is hardware failure and this is for sure that such disk might not survive for longer time. Check the serial number in Seagate size and verify the warranty status. If the disk is still under warranty get a replacement. Reply With Quote #3 Unread 28-03-2012 Haleema Haleema is offline Member Join Date: May 2011 Posts: 361 Re: What can I do to fix Seagate 7200.11 Bricked hard disk q You had not mentioned which hard drive you are using Seagate 7200.11 is a series. The issue can be due to low power. So if you had already a drive connected to your system then there is one option you can try. Connect the drive to any external enclosure. External hard disk enclosure comes with external power supply. They get ample of power source to carry out large copy paste option and so they work smoothly. I had did the same and now I am using my 3TB drive on a NAS device. Do not spoil the product by making changes with your own hand. You might not find any stuff on web and if you open it you will loose your warranty. Reply With Quote #4 Unread 28-03-2012 AliyaK AliyaK is offline Member Join Date: Jul 2011 Posts: 291 Re: What can I do to fix Seagate 7200.11 Bricked hard disk q What more you can do is get a firmware update. A firmware update might fix up the issue that your drive is facing. You mentioned that the motor is not spinning on full rate. This shows low power issue. Reply With Quote #5 Unread 28-03-2012 KirtiPatel KirtiPatel is offline Member Join Date: Jul 2011 Posts: 280 Re: What can I do to fix Seagate 7200.11 Bricked hard disk q There are certain tools that can be used to determine whether the drive can or cannot work. Like HD Sentinel, HDDScan, Smartmontools, HxD, etc. This tools will tell you about your current drive status. Run and scan your system and then check back. Reply With Quote #6 Unread 28-03-2012 CamilleT CamilleT is offline Member Join Date: Jul 2011 Posts: 360 Re: What can I do to fix Seagate 7200.11 Bricked hard disk q It is right that you should go for replacement. A bricked drive can have serious hardware issue and there might less time it can survive. It is right to use the above tools atlseat you can get a overview what is the exact issue with the drive. Reply With Quote Reply

How to use TVHeadEnd with Sky Optus D1

How to use TVHeadEnd with Sky Optus D1 I am form NZ and Sky was having the problem on detecting all the Sky channels. I used the NextPVR and then to manually set my LNB settings to Low: 10750000 Hi: 10750000 LNB Switch Freq: 10750000 By doing this I was able to get all the channel. But I have no idea how can I do the same with the TVHeadEnd. I am comfortable to do this with the MythTV although I like to use the TVHeadEnd as it look comfortable for most of the stuff I am unable to get any DVB-S2 muxes to work although I think that this is because of the LNB settings, does anyone here have use the tvheadend before can tell me how can I set these . my Windows box has turn out to be very unbalanced mostly about my TBS-6984. I'm using xbmc as frontend so I'm not dependant on an OS for the server. I am unable to use the using xbmc as frontend so completely depended on the OS for the server. Please help me on this I will be really glad Reply With Quote #2 Unread 29-03-2012 Chopfyt Chopfyt is offline Member Join Date: Mar 2011 Posts: 370 Re: How to use TVHeadEnd with Sky Optus D1 Well to the knowledge that I have on this it will be nice if you choose any satellite and after that start the "auto detect muxes" with any luck it will find your channels but I ma not sure about this , I may wrong on this Reply With Quote #3 Unread 29-03-2012 Beatricef Beatricef is offline Member Join Date: May 2011 Posts: 311 Re: How to use TVHeadEnd with Sky Optus D1 I guess that need the card to support the blind scan, well I did not tried the D1 however I did include every muxes on the C1/D3 manually without any difficulty . Did you check that you have entered the freq in KHZ? Lyngsat is listed in MHZ so you require to put in 3 zeros. Can you tell me what version of the tvheadend are you using ? well I am using the latest GIT version that has the mod to utilize my LNB as it's not accessible in the main trunk Reply With Quote #4 Unread 29-03-2012 Pulavarti Pulavarti is offline Member Join Date: Nov 2011 Posts: 61 Re: How to use TVHeadEnd with Sky Optus D1 Hi guys Thanks for the reply but like to tell you that I have managed to make it work. All I have to do is download the source code form the Github and modify the setting on the standard LNB to 10750000, 10750000, 10750000. As soon as that I done I was able to tune all channel . so the solution to this issue is this in case someone need , thanks again guys for the help Reply With Quote #5 Unread 29-03-2012 Oviyam Oviyam is offline Member Join Date: Jan 2012 Posts: 42 Re: How to use TVHeadEnd with Sky Optus D1 Hey that great news that you have make it to work but can you explain how did you change the setting I will like to know that as I think that I am also having the similar problem and I am really be thankful of you help me on getting TVHeadEnd to work. Reply With Quote #6 Unread 29-03-2012 Pulavarti Pulavarti is offline Member Join Date: Nov 2011 Posts: 61 Re: How to use TVHeadEnd with Sky Optus D1 Well answer is simple all you have to do is get the code from the Github as I mention above and look for the source code for the Universal . just the one file , comes up about three time . the last instance is the array that can be edited . change the standard to the Low: 107500000 Hi: 107500000 LNB Switch Freq: 107500000 After that compiled and change the binary. For the instruction I use the article title Analogue NTSC with HTS-Tvheadend but I can’t remember the site . let me know if that help Reply With Quote #7 Unread 29-03-2012 Oviyam Oviyam is offline Member Join Date: Jan 2012 Posts: 42 Re: How to use TVHeadEnd with Sky Optus D1 Thanks , really appreciate this but like to aske you if you had any successes with using the option of Circular 10750 which is presented on the Satellite configuration under the LNB type. Reply With Quote

Need suggestion on Alignment of Sky Satellite dishes

Need suggestion on Alignment of Sky Satellite dishes hi guys I need help the problem is with my Satellite dishes . I am looking for the help on doing the Wok-Fi setup by the Ubiquiti Nanostation Loco mounted on it and I need to know how can I be able to allied it . so what I need to know is what angel should the 60cm sky dish require to be, should it be the horizontal? It is the Standard sky dish along with the offset feedhorn. I need to mount the green laser pointer on it so that I was able to see the pointing. I have looked everywhere for the solution but was not able to find any answer to this. Is there any one here can help me on this issue , sa it been a while I am looking for the solution . I will be really appreciating any afforded Thanks in advance Reply With Quote #2 Unread 29-03-2012 FarhaS FarhaS is offline Member Join Date: May 2011 Posts: 400 Re: Need suggestion on Alignment of Sky Satellite dishes It is hard to understand what exactly are you looking here can you tell me that you need the angle of the physical dish itself, rather than the altitude angle to Optus D1, because that will be other aspect because of the offset dish design. Also see where you have directed the laser, this is for the reason that the aviation industry as well as the police are taking cockpit laser strikes incredibly serious and that too for the gee reason Reply With Quote #3 Unread 29-03-2012 Cauvery Cauvery is offline Member Join Date: May 2011 Posts: 301 Re: Need suggestion on Alignment of Sky Satellite dishes Its hard to say as it been some time now that I have seen it but I guess that it will be on the elevation scale on the side that is of the mounting bracket. For getting the horizontal elevation it is necessary that the LNB arm should be point downward. And I am guessing that you are unable to use the normal vertical mounting pole because it is clearly intended to point the dish in the general direction of the sky I am not sure but the elevation angle for Optus D1 must be 45 degree on the Auckland and some degree less to the south to get horizontal. That why it needed the tip ahead by the similar amount this should do the trick for you . Reply With Quote #4 Unread 29-03-2012 Haleema Haleema is offline Member Join Date: May 2011 Posts: 361 Re: Need suggestion on Alignment of Sky Satellite dishes You might be correct although that will be the angle to the satellite but what about the dish . if the altitude angle is been required here then there are quite a few resources available that can calculate it based on geographical location. Well as far as the Auckland concern , it's nearly 44.5°. what has been asked here is as I think is the physical angle of the dish itself. And that is other thing and required the degree of offset used in sky dishes Reply With Quote #5 Unread 29-03-2012 Cauvery Cauvery is offline Member Join Date: May 2011 Posts: 301 Re: Need suggestion on Alignment of Sky Satellite dishes Well you are correct that what is asked here is how to get to the horizontal, so in that case the satellite angle that need will be 0 degree . and that is about 45 degrees like I said before and incase dish which is aligned to D1 then push it little down by 45 degrees. As the poster need to aim it to the point that is above the ground level . in case it has the elevation scale then this is no need of offset, all you need to do is set it to the zero . if it do not have the usable scale then the workout from the start point being at first set for an elevation angle of on 45 degrees. To make it horizontal Reply With Quote #6 Unread 29-03-2012 Gopal Shrivastav Gopal Shrivastav is offline Member Join Date: Jan 2012 Posts: 54 Re: Need suggestion on Alignment of Sky Satellite dishes The Horizontal thing is right . actually I am also planning to mount the wifi adapter in it and pointing it at 150m away, at the moment . the adapter is heavily fluctuating signal strength, so I guess it will going to improve with the disc . it is an Ubiquiti Nanostation Loco thus previously intended for point to point links. I really want to the dish enhances this if allied properly. The dish is a not the same one and is latest however I’m using it for reference. It doesn't look as if to have a zero. So it look as if i require to set it to 20, then angle it a additional 20 degrees on the pole? Reply With Quote #7 Unread 29-03-2012 DamarisK DamarisK is offline Member Join Date: Jun 2011 Posts: 428 Re: Need suggestion on Alignment of Sky Satellite dishes What I suggest that take the builders level and put on the dish. Just don’t care about the offset aspect. Now do this Get the face level and join the WIFI on where LNB was on the arm Now get it working and after that tweak from there Look for the satellite Horizontal can be working in case the both the broadcast and receive components set on the similar height 150m apart. May be you need to have tweak it anyway so you start with the level then go from there Reply With Quote #8 Unread 29-03-2012 Rust-18 Rust-18 is offline Member Join Date: Aug 2011 Posts: 208 Re: Need suggestion on Alignment of Sky Satellite dishes Like to tell you that both is on the same height, the roof as well as the house . I guess I have to look for the protractor or see if I am able to get the mount set to 0 by mounting the pole at 20 degrees. Is there any way to know correct angle for the actual face of the dish at horizontal. After that mount a laser level. Don’t have to concern about the aircraft of any sort. Just raise on of this thing up to the sky . Reply With Quote #9 Unread 29-03-2012 KirtiPatel KirtiPatel is offline Member Join Date: Jul 2011 Posts: 280 Re: Need suggestion on Alignment of Sky Satellite dishes Well I suggest you to mount to transmitter on the dish, all you have to do download WiFi Analyzer on your smart phone and just stand on the receiver end of the Smartphone while tell someone to tilt the dish for the good signal? Reply With Quote Reply

DishTV S7090PVR Digital TV Receiver lockups- need help

DishTV S7090PVR Digital TV Receiver lockups- need help Is there someone who have experience the lockups with the DishTV S7090PVR. I am getting this from last 4 to 5 days. Once this happens then there is only one option left for me and that is to reset the power. To do that I just press and hold the power button and until it switches off and after that it trn on again in order to recover. Currently, I am running the latest firmware (v1.1e). Because of this, I have lost schedule list but there is no problem with the recorded programs. When it locks and press any button on the remote then it looks to register on the unit. I am saying this because I cans see that there is light flash on it while I press the button. I ant see any sound or any picture. I am connected with the HDMI for video as well as the optical cable with the receiver for the audio. There is no pattern in this. If you can tell me any solution for this then I will be thankful for this. Reply With Quote #2 Unread 29-03-2012 Rhesa Rhesa is offline Member Join Date: Nov 2010 Posts: 350 Re: DishTV S7090PVR Digital TV Receiver lockups- need help This really seems like either it is the problem design or with the manufacturer. There is possibility for both of these. Better option for you is to contact to the manufacturer and ask them about the same. They will help you with this issue. Reply With Quote #3 Unread 29-03-2012 Suigetsu Suigetsu is offline Member Join Date: Mar 2011 Posts: 435 Re: DishTV S7090PVR Digital TV Receiver lockups- need help There is also possibility that the firmware is outdated or corrupted and that is causing problem for you. Just update the firmware to the latest version and see if it can solve the problem for you. There have been some of the other cases like this where updating the BIOS resolves the issue and so I hope that it will do the same for you as well. Reply With Quote

Unable to view ftp site in Internet Explorer 8

Unable to view ftp site in Internet Explorer 8 I recently installed Opera on my PC. During its first startup, it asked me if I wanted to set it as default browser in my system and I clicked on Yes. I used it for some days and later went back to use Internet Explorer 8. When I started Internet Explorer and entered address of a website, an error message saying, ‘This site cannot be opened in windows explorer’. When I clicked on details, it said that there is an error opening the FTP site. I tried many other websites, but they too failed to open. I am currently using Opera, but I need to fix Internet Explorer, can someone help me? Reply With Quote #2 Unread 24-03-2012 FarhaS FarhaS is offline Member Join Date: May 2011 Posts: 400 Re: Unable to view ftp site in Internet Explorer 8 you can try resetting the security settings of Internet explorer to default. If you are using Microsoft Outlook, then see to it that it is not using Internet Explorer 8 as its browser for connectivity. I have seen on many systems that Microsoft Outlook doesn’t work well with Internet Explorer. You can also see try editing the registry. If it is related to the registry keys, then I am sure what the problem can be. Find a PC maybe one of your friend’s or of some relative which has Internet Explorer 8 working properly. You need to import the good working registry key into your system which has broken registry key. The registry key to import is, HKEY_CLASSES_ROOT\ftp Reply With Quote #3 Unread 29-03-2012 megancheung megancheung is offline Member Join Date: Mar 2012 Location: LA,USA Posts: 12 Re: Unable to view ftp site in Internet Explorer 8 I am connected to a wireless router through an ethernet cable. I've tried unchecking all the boxes under LAN settings and many other tips I found online. Nothing worked. I scanned my system with malwarebytes and nothing was found. I have Norton Internet Security 2009 and I disabled the firewall to see if that was blocking it. That also did not help Reply With Quote #4 Unread 29-03-2012 Kh@LnaYak Kh@LnaYak is offline Member Join Date: Nov 2011 Posts: 377 Re: Unable to view ftp site in Internet Explorer 8 Hey have you followed this solution that has been mentioned by FarhaS: Quote: Find a PC maybe one of your friend’s or of some relative which has Internet Explorer 8 working properly. You need to import the good working registry key into your system which has broken registry key. The registry key to import is, HKEY_CLASSES_ROOT\ftp I have found a no of people mentioning that this has worked out for them in same issue. Reply With Quote

Unable to connect with Netflix using PS3

Unable to connect with Netflix using PS3 Well i am using PS3 from past couple of months. I have got the Netflix disc. Well i have loged into the Netflix account and i have got an error message which can be stated as ‘cannot connect to Neflix. Please try again later...’ Let me know if you are having any specific solution to get the requirement of mine. Any help on this particular matter would be highly appreciated. Thanks a lot in advance. Reply With Quote #2 Old 07-06-2011 Bharat89 Bharat89 is offline Member Join Date: Nov 2009 Posts: 1,193 Re: Unable to connect with Netflix using PS3 Looking at the situation i wanted to confirm something which would be helpful to figure out the root cause of the problem. let me know whether Netflix would require to have an internet connection? Let me know if you which kind of internet connection do you using? How you have connected with internet with wired connection or wireless connection? Let me know the answer of the above mentioned question as early as possible. Reply With Quote #3 Old 07-06-2011 Roxy_jacob Roxy_jacob is offline Member Join Date: Nov 2009 Posts: 1,128 Re: Unable to connect with Netflix using PS3 It is totally dependent on the internet connection which you are using currently. Well i let you know that you should try to make the thing working by enabling the BD Internet connection. Also you should have the latest version of the system update to make the thing working. Also it could be possible that the router of yours is not allowing the instant stream. You should also consider the working of the router. Reply With Quote #4 Old 07-06-2011 Henryosa's Avatar Henryosa Henryosa is offline Member Join Date: Nov 2009 Posts: 1,349 Re: Unable to connect with Netflix using PS3 I am suggesting following steps which you should try to fix the matter of yours. You have to go for Settings and go for Date & Time Settings and then go for the Date & Time and you have to select Set Via Internet. Now go for Video and go for BD Data Utility then go for Netflix Instant Streaming Disc and click Tringle and press Delete. Now visit the official website and enter the activation code for the PS3. Reply With Quote #5 Old 07-06-2011 Sheenas Sheenas is offline Member Join Date: Nov 2009 Posts: 880 Re: Unable to connect with Netflix using PS3 Well i am suspecting that there is an issue with the servers of the Netflix itself. I recommend that you should wait for some times and see whether it is working or not. if there is server is issue then the back end team would be already working on it. I am hoping that the server would be up shortly and you will be able to get the requirement of yours. Let me know whether the thing which i have mentioned over here is useful to you. Reply With Quote #6 Old 08-06-2011 rashmi_ay rashmi_ay is offline Member Join Date: Nov 2009 Posts: 655 Re: Unable to connect with Netflix using PS3 I think there is technical issue which you are having while connecting with Netflix. Well I recommend that you should contact the customer support team to get the further assistance. You should provide the details which is associated with the problem which you are getting. Well they will tell you about the steps which you can use to fix the matter of yours. Reply With Quote #7 Unread 29-03-2012 B0atman B0atman is offline Member Join Date: Mar 2012 Posts: 1 Re: Unable to connect with Netflix using PS3 I had the same issue, after carrying out a internet connect test on the PS3, it failed on connecting to the playstation network. so i went to sign in there and accept the terms & conditions and as if my magic, NETFLIX worked. Hope this helps Reply With Quote Reply

getting blank page while loading facebook in google chrome

getting blank page while loading facebook in google chrome I have installed Google chrome browser in my computer and after installing the Google chrome browser in my computer all the thing were working fine. From last some days it has started giving me problem. Now whenever I try to load the facebook in Google chrome at that time it loads blank page only. I don’t know what is wrong. Please help me to solve this issue. Reply With Quote #2 Old 10-11-2011 Roxanne's Roxanne's is offline Member Join Date: Jul 2011 Posts: 257 Re: getting blank page while loading facebook in google chrome What happens when you load the facebook in some other browser? If you are able to load the facebook in other browser then I think problem is with the Google chrome browser only. If you have installed any extension related to the Google chrome then you have to uninstall that extension and after that check whether your problem gets solved or not. Reply With Quote #3 Old 10-11-2011 Kiran25 Kiran25 is offline Member Join Date: Aug 2011 Posts: 372 Re: getting blank page while loading facebook in google chrome I think you should try to solve this problem by clearing the cache and cookies in the Google chrome browser. First you have to open the Google chrome browser in your computer and after that you have to click on the wrench icon and after clicking on the wrench icon you have to click on the Tools option and after clicking on the tools option you have to click on the clear private data. Now after clicking on the clear private data you have to select the clear cookies option and after selecting the clear cookies option you have to click on the clear private data option and then you have to close the Google chrome browser and after that you have to open the Google chrome browser and after opening the Google chrome browser you have to check whether same problem is coming or not. I think after trying this solution your problem will get solved. Reply With Quote #4 Old 10-11-2011 PhoebeM PhoebeM is offline Member Join Date: Jul 2011 Posts: 325 Re: getting blank page while loading facebook in google chrome If clearing the private data does not help you to solve this issue then you have to solve this issue by reinstalling the Google chrome browser in your computer and after reinstalling the Google chrome browser in your computer you have to check whether your problem get solved or not. Reply With Quote #5 Unread 30-03-2012 M_OBizzle M_OBizzle is offline Member Join Date: Mar 2012 Posts: 1 Re: getting blank page while loading facebook in google chrome I had a pop up blocker installed from the Google chrome store (Better Pop Up Blocker). I was receiving the same blank page your referring to intermittently and couldn't figure out why, then determined THAT extension was causing the blank pages to display. After adding it to the 'allow' section I had no more issues. Check your pop up blockers, ad blockers, etc. and ensure facebook.com is added as a safe URL. Hopefully that does the trick. Reply With Quote Reply

Best 3D image / video sharing site

Hey guys I am looking for some Best 3D image / video sharing site’s for my work, I have checked out for the same and I have found that there are a number of them offering their best deal but then I just wanted to know from you all the best one, as you all might using the same and can share me your experience as well. Reply With Quote #2 Unread 28-03-2012 Sudhapriyan S Subramaniyam Sudhapriyan S Subramaniyam is offline Member Join Date: Mar 2012 Posts: 51 Re: Best 3D image / video sharing site Below are the best photo sharing sites that i have been using: Flickr SmugMug Picasa Web Albums Phanfare Zenfolio Photobucket Just check them out and you will surely like them. Reply With Quote #3 Unread 28-03-2012 Yayati Yayati is offline Member Join Date: Oct 2011 Posts: 92 Re: Best 3D image / video sharing site As far as the video sharing is concerned I think that youtube is the best one but then there are some other options for you as well: blip.tv (Basic: Free, Pro: $96/year) Vimeo (Basic: Free, Plus:$60/year) YouTube (Free) Viddler (Free) Dailymotion (Free) Reply With Quote #4 Unread 28-03-2012 Edha Edha is offline Member Join Date: Nov 2011 Posts: 69 Re: Best 3D image / video sharing site I complexly agree to you for this I have been using youtube since a long time for video sharing and I think that it is just the bets one, it just supports a number of viewing formats and you just get a free membership for the same but then the only thing that I think can be said to be as a drawback is that it supports 3D video only and no still videos. Reply With Quote #5 Unread 29-03-2012 Kh@LnaYak Kh@LnaYak is offline Member Join Date: Nov 2011 Posts: 377 Re: Best 3D image / video sharing site Just to help you choose the best,this is the listing of 2012 Video Share Websites Comparisons , just check it out and you will be able to make out the best one for yourself: YouTube Metacafe Break Google Video Dailymotion Yahoo! Video Revver Vimeo vidiLife Stickam Reply With Quote #6 Unread 30-03-2012 megancheung megancheung is offline Member Join Date: Mar 2012 Location: LA,USA Posts: 12 Re: Best 3D image / video sharing site geekzone SmugMug Flickr Picasa Web Albums fanpop

Out of memory at line 56

When ever it try to watch a video i am getting out of memory at line 56 Error , a pop comes with this message, what could this be issue in memory of ram or some drive ? How to solve this issue . Thanks for the help . Reply With Quote #2 Old 13-08-2009 Pugsly's Avatar Pugsly Pugsly is offline Member Join Date: Jan 2006 Posts: 6,704 Re: Out of memory at line 56 When you run a large number of Windows-based programs, "Out Of Memory" error messages appear when you attempt to start new programs or try to use programs that are already running, even though you still have plenty of physical and pagefile memory available. To correct this problem, increase the size of the desktop heap: 1. Run Registry Editor (Regedt32.exe). 2. From the HKEY_LOCAL_MACHINE subtree, go to the following key: \System\CurrentControlSet\Control\Session Manager\SubSystems 3. Select the Windows value. 4. From the Edit menu, choose String. 5. Increase the SharedSection parameter. For Windows NT: SharedSection specifies the system and desktop heaps using the following format: SharedSection=xxxx,yyyy Add ",256" or ",512" after the yyyy number. For Windows 2000, Windows XP, and Windows Server 2003: SharedSection uses the following format to specify the system and desktop heaps: SharedSection=xxxx,yyyy,zzz Increase the zzz number to "256" or "512." __________________ It is criminal to steal a purse, daring to steal a fortune, a mark of greatness to steal a crown. The blame diminishes as the guilt increases Reply With Quote #3 Old 13-08-2009 Spyrus's Avatar Spyrus Spyrus is offline Member Join Date: May 2008 Posts: 3,494 Re: Out of memory at line 56 it also could be a problem with the Flash Player. Try following the steps below. If you are in the administrator account, just go to Add/Remove Programs to see if you have Adobe or Macromedia Flash installed. Uninstall them a see this tutorial Download it again and install it again : http://www.adobe.com/software/flash/about/ Reply With Quote #4 Old 13-08-2009 Snake08's Avatar Snake08 Snake08 is offline Member Join Date: Apr 2008 Posts: 3,328 Re: Out of memory at line 56 It is the problem of the Java code on the website, you cant fix this issue , are you having the error on every video site . Reply With Quote #5 Unread 27-03-2012 jejen2012 jejen2012 is offline Member Join Date: Mar 2012 Posts: 1 Re: Out of memory at line 56 YOU ARE NOT OUT OF MEMORY BUT IF YOUR COMPUTER IS USING OVER 640 MB OF RAM FOR EACH PAGE FILE YOU WILL HAVE A VIRTUAL MEMORY PROBLEM. 1. Start bar- control panel 2. System and security (control pannel might take you their automaticly) 3. System 4. Advanced System Settings 5. Click on the settings for performance 6. Click on the advanced tab 7. See your virtual memory? Is your paging file size bigger than 640MB? If it is, change it to 640MB. 8. Restart computer note- this may take a couple days to a week for your system to restore but once it does, you will never see out of memory at line: 1, 2, 14,56, etc. etc. again :-) If you are impatient, download mozilla firefox (free) and use that. Facebook was still giving me problems after I fixed my RAM, but not as bad, so you might want to stay off it for awhile. I use it everyday now. Delete cookies and cache to make your internet run faster. Download internet explorer 9 (also free) Reply With Quote #6 Unread 30-03-2012 megancheung megancheung is offline Member Join Date: Mar 2012 Location: LA,USA Posts: 12 Re: Out of memory at line 56

Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini

Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini Recently I bought a new Dell Inspiron 6400 laptop with a Broadcom 44/10x100 integrated controllers and Dell 1390 WLAN mini-card installed in it. Have no issue with this laptop at all until now but I guess there is some incompatibility with this wireless mini card that is installed in it. I am completely unable to get the laptop function with my wireless internet. Is there anyone who can let me know what exactly could have gone wrong, this complete brand new laptop I bought last week. Reply With Quote #2 Unread 29-03-2012 Roxanne's Roxanne's is offline Member Join Date: Jul 2011 Posts: 257 Re: Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini Did you install the card by yourself or you got it already installed in the machine from where you bought it. Why don’t you try out connecting your laptop to the internet using different wireless network. if possible just try it out and let me know what exactly happens. Also if possible make sure that you are running the latest version of the firmware in your router; please mention the brand and model of the router you are running at your place. Reply With Quote #3 Unread 29-03-2012 Wild Kat Wild Kat is offline Member Join Date: Dec 2011 Posts: 94 Re: Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini Thanks for your precious suggestion; I did try a different network as per your suggestion. It worked very well at the library but I actually felt that the network was not quite secure. After that when I turned off WPA-PSK, the wireless worked fine and continued for half an hour which was the longer ever this machine stayed with a network connection. But I truly don’t want to run the network without WPA, so therefore please try to suggest me something else. Reply With Quote #4 Unread 29-03-2012 Zaedgy Zaedgy is offline Member Join Date: Dec 2011 Posts: 94 Re: Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini Seems like the entire Dell laptops of this model come up with this issue, I too have the same laptop installed with the same WLan mini card in it. In my case everything work perfectly alright and also the machine connects to the network smoothly. But then after few minutes the system somehow crashes the wireless network. I mean to say that the Inspiron laptop and the other machines that are connected to the network is disconnected and due to this the wireless network that I have no longer exist in the list of the networks that are showed up. Reply With Quote #5 Unread 29-03-2012 robot.txt robot.txt is offline Member Join Date: Jul 2011 Posts: 1,349 Re: Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini Quote: Seems like the entire Dell laptops of this model come up with this issue, I too have the same laptop installed with the same WLan mini card in it. I guess you need to make some correction in your statement, not just this model but also some other models of Dell Laptops are showing up the same behavior. I have a Dell Inspiron 2501 with the same network cards, 1390 WLAN and Broadcom. It does the same thing same as in your case. Crashes my home wireless network after a smooth working for at least half an hour, all my network wireless connections get fail. But somehow everything is recovered after few minutes. Reply With Quote #6 Unread 29-03-2012 Bala Murugan S Bala Murugan S is offline Member Join Date: Jul 2011 Posts: 1,381 Re: Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini Make sure that you are running all the latest drivers especially Dell wireless 1390. Also see to it that the Broadcom wireless driver is updated with the latest version. I have the latest firmware updated router of Dlink 514. Whenever I face any issue the first thing I see to is that the related drivers and hardware are updated with their latest version. Reply With Quote #7 Unread 29-03-2012 dkbose dkbose is offline Member Join Date: Oct 2011 Posts: 599 Re: Unable to connect Dell Inspiron 6400 to internet with Dell wireless 1390 WLAN mini Try out the following thing: Unplug the router and turn off the system wifi Control panel > System > Hardware Tab > Device Manager Now click on the + Next to network Adapater option After that just click on the DELL WIRELESS 1390 WLAN mini card Now you can see a window pop up, over there select the Advanced Tab Into it click on Manage wireless settings Under it, change to disable and click OK Hopefully everything will work well from now. Reply With Quote

How can I get back my Hacked facebook Account?

How can I get back my Hacked facebook Account?

New Google Chrome 17 is much Faster and Safer

New Google Chrome 17 is much Faster and Safer Hello recently heard that the Google Chrome 17 is much Faster and Safer previous version of Google Chrome. So I just need to what are things are improved in new version of Google Chrome. Thanks in advance… Reply With Quote #2 Unread 20-03-2012 Aadidev Aadidev is offline Member Join Date: May 2011 Posts: 216 Re: New Google Chrome 17 is much Faster and Safer Version 17.0.963.46 is now available on all platforms and below is new features of this web browser: New API for extension developers. Preloading pages displayed in the address bar tips. Scan downloaded files for threats. Many other small changes. And of course the security fixes in the amount of 10,500 dollars. Reply With Quote #3 Unread 20-03-2012 Hadriel Hadriel is offline Member Join Date: Jun 2011 Posts: 565 Re: New Google Chrome 17 is much Faster and Safer Another interesting feature of the Chrome 17 stable version emergence of new Extension API, and should provide additional safety feature scans executable files, users downloaded to the expanse of the World Wide Web (that is, files with the extension. Exe,. Msi, and so on). If an executable is not included in the "white list", Chrome is looking for more information on Google, in particular, whether the site from which is loading. Reply With Quote #4 Unread 20-03-2012 Carita Carlos Carita Carlos is offline Member Join Date: Jun 2011 Posts: 512 Re: New Google Chrome 17 is much Faster and Safer The latest version of Google Chrome is released. And it might just be worth to update to that version. There are two notable additions have been made in Google Chrome 17 . One is to predict the page that you want to visit. When you start typing in the address bar, the browser attempts to predict which site you mean. This website is immediately loaded in the background. This is similar to the way the Google search engine. The search terms are automatically completed and the results have come into the picture before you finish typing. Reply With Quote #5 Unread 20-03-2012 Roxanne's Roxanne's is offline Member Join Date: Jul 2011 Posts: 257 Re: New Google Chrome 17 is much Faster and Safer Another new feature in Google Chrome is to check for malware downloads. That way you know you are dealing with malware before it is too late. For now, the feature works only in Windows and for files of type. Exe and. Msi. Google Chrome 17 is currently only available in beta version. At the user begins to type (frame you enter a search term or URL) Omnibox, read before the candidate results predicted by the AutoComplete feature now (pre-rendered). Become that if a user clicks on the link predictable of Google, the pages that were cached will be displayed immediately. Reply With Quote #6 Unread 20-03-2012 Kiran25 Kiran25 is offline Member Join Date: Aug 2011 Posts: 372 Re: New Google Chrome 17 is much Faster and Safer Integrating the address bar and search "Google Chrome" the "omnibox" when you enter the URL to the URL of the Web site that it is possible to predict the auto-completion. In fact, the user is likely to visit a URL to preview the Web page rendering in the background, move to the 'Enter' key after pressing the confirm URL is actually a Web page to appear is a way to reduce the time it takes. Google created a blacklist of suspicious Web sites to visit Web sites and used to compare the way, but to trick users to install rogue security software, and more types of Web sites has addressed issues that are vulnerable to block. Reply With Quote #7 Unread 20-03-2012 PhoebeM PhoebeM is offline Member Join Date: Jul 2011 Posts: 325 Re: New Google Chrome 17 is much Faster and Safer This new version of browser have been focused on protecting users from attacks from a malicious Web site, subject to that Web site Web site itself is to show safe, you try to download the malware has increased, with enhanced ability to analyze an executable file that the user tries to download (exe or msi things such as extension). The service "Safe Browsing" report fraudulent sites for administrators in December last year was added to reflect the report that were received in the notification feature. When you enter the URL in the bar "Omnibox" Search address / page load automatically in the background doing the auto-completion candidate of URL "pre-rendering feature" has been newly introduced. This page is displayed immediately called to confirm the URL by the user. Reply With Quote #8 Unread 20-03-2012 CamilleT CamilleT is offline Member Join Date: Jul 2011 Posts: 360 Re: New Google Chrome 17 is much Faster and Safer In security-related, it is useful to analyze executable file with an extension such as. Msi or. Exe, the ability to protect users from malicious file has been added. File is not in the white list are not only refer to black list a collection of information known malware, and "safe" safety is to check information such as whether or not hosting the malware site that increase. Reply With Quote #9 Unread 4 Weeks Ago Kanknaadi Kanknaadi is offline Member Join Date: Feb 2012 Posts: 75 Re: New Google Chrome 17 is much Faster and Safer I have installed Google chrome on my system and it is a awesome developmentwhich is a save for the spell check.. i really like this new product although i am facing freezing issue. i have tried the lots of steps to solve this issue but nothing helped me to solve mine issue. can anyone suggest me how to solve freezing issue with this product... Reply With Quote

How to get rid of 203 Non-Authoritative Information (since HTTP/1.1)

How to get rid of 203 Non-Authoritative Information (since HTTP/1.1) Hi all, I am having some problem while accessing some of the sites. When I search for something on google and then click on results then for some of the links, instead of opening the site it shows me some error with the title as 203 Non-Authoritative Information (since HTTP/1.1). I don’t know that what does this error mean and how can I get rid of this error. If you have some information regarding this then please let me know that. I will be thankful for all the replies for you. Reply With Quote #2 Unread 4 Weeks Ago Suigetsu Suigetsu is offline Member Join Date: Mar 2011 Posts: 435 Re: How to get rid of 203 Non-Authoritative Information (since HTTP/1.1) I would like to tell you that the 203 Non-Authoritative Information (since HTTP/1.1) comes when the request for the server is processed but the information that is to returned is from the another source. Reply With Quote #3 Unread 4 Weeks Ago Chopfyt Chopfyt is offline Member Join Date: Mar 2011 Posts: 370 Re: How to get rid of 203 Non-Authoritative Information (since HTTP/1.1) This status information from a server code should be returned instead of 200 when it is not the original server is, but for example a proxy server. The web-browser experiences in this way that the data could be sent successfully, but do not come from the original server and therefore there is no guarantee on their timeliness. So it will be better for you if you can wait for some time and then try with the same URL to see if you are getting the same error again. This is problem with the server side and not from the client side so you cannot do anything for this. Reply With Quote #4 Unread 4 Weeks Ago Deverell Deverell is offline Member Join Date: May 2011 Posts: 336 Re: How to get rid of 203 Non-Authoritative Information (since HTTP/1.1) I am not sure about this but you can try by changing the browser and see if you are getting the same. There are many of such error codes that belong to issue with the browsers and so you must confirm this by changing the browser. My recommendation to you is to use Firefox or Opera. Reply With Quote #5 Unread 4 Weeks Ago FarhaS FarhaS is offline Member Join Date: May 2011 Posts: 400 Re: How to get rid of 203 Non-Authoritative Information (since HTTP/1.1) When is the last time you ran the Windows update? If it’s being a long time that you have updated the Windows then it will be good for you if you can run the same. Many of such issues get solved by running the windows update. Other than this you can also run the PC Cleaner Pro. This program is great for the Windows repair. It will help you to fix any of the Internet Explorer errors, ActiveX errors, Javascript and scripting errors. If you are facing slow performance while browsing then also it will be helpful for you. Try with these two things and see if you are getting the same thing again. If yes then please reply back and we will try to get it solved in some other possible ways. Reply With Quote #6 Unread 4 Weeks Ago Beatricef Beatricef is offline Member Join Date: May 2011 Posts: 311 Re: How to get rid of 203 Non-Authoritative Information (since HTTP/1.1) The 203 status code indicates that the request was received as well as understood and information send back is the response as of the third party instead of the original server. This error is somewhat similar to the 200 status code. The returned meta information within the entity-header is not the ultimate set as accessible as of origin server but it is collected from a local otherwise a third-party copy. This set may be from the subset or the super subset for the actual version. This might be included with the local annotation information for resource. Reply With Quote #7 Unread 4 Weeks Ago Suprakash Suprakash is offline Member Join Date: Nov 2009 Posts: 476 Re: How to get rid of 203 Non-Authoritative Information (since HTTP/1.1) Quote: Originally Posted by Chopfyt View Post This status information from a server code should be returned instead of 200 when it is not the original server is, but for example a proxy server. The web-browser experiences in this way that the data could be sent successfully, but do not come from the original server and therefore there is no guarantee on their timeliness. So it will be better for you if you can wait for some time and then try with the same URL to see if you are getting the same error again. This is problem with the server side and not from the client side so you cannot do anything for this. hey this is not the problem with the browser. This is something wrong with the server and I don’t think that changing the server will make any difference. Reply With Quote Reply